2025-03-03

2nd Row Seat Buckle Closeout Split - LH (Remove and Replace)

Código de corrección 1308005161, 1308005162 0.36 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a LaborTimeFeedback@tesla.com. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.

Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Este procedimiento están en fase PRELIMINAR. Aunque se ha validado, es posible que falten advertencias y precauciones. Siga los requisitos de seguridad y tenga mucho cuidado cuando trabaje en sistemas y componentes de alta tensión o cerca de ellos. Envíe sus correcciones y comentarios a ServiceDevelopment@teslamotors.com.
  1. Open LH rear door
    Informational PurposesAn informational icon, calling your attention
    Nota
    Push LH C-pillar door trigger to release
  2. Lower LH rear window
  3. Partially release LH rear primary door seal
  4. Remove LH lower C-pillar trim
    Informational PurposesAn informational icon, calling your attention
    Nota
    3x clips, 7x tabs, 4x datums, Starting at door sill pull upward then forward to release, Leave trim attached to seat belt
  5. Remove 2nd row seatback LH outboard bolster
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x tabs, 1x datum, 3x clips, Release tab near the bottom of LH outboard bolster, Partially release LH 2nd row shoulder cover and remove bolster from vehicle
  6. Fold up 2nd row 60 seat
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull tether to release then lift up until locked in place
  7. Open RH rear door
    Informational PurposesAn informational icon, calling your attention
    Nota
    Push RH C-pillar door trigger to release
  8. Lower RH rear window
  9. Fold up 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull tether to release then lift up until locked in place
  10. Partially release RH lower C-pillar trim
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x clip, 1x datum
  11. Remove rear wall lower trim
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x push clips, 4x clips, Remove outermost push clips, then pull straight forward to release inner clips
  12. Fold down 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull tether to release then pivot down until locked in place
  13. Disconnect LH 2nd row cushion assembly connectors
    Informational PurposesAn informational icon, calling your attention
    Nota
    3x connectors, 5x clips
  14. Remove LH 2nd row seat cushion outboard cover
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x clip, Pull outward from lower forward section to release
  15. Release LH 2nd row cushion from underbelly
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull plastic retainers outward to release from underbelly
  16. Remove LH 2nd row seat underbelly
    Informational PurposesAn informational icon, calling your attention
    Nota
    8x clips, Pull outwards from bottom to release
  17. Remove LH 2nd row cushion assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    6x clips, Lift upwards off seat frame
  18. Remove LH 2nd row seat buckle split closeout assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x clips, 1x datum
  19. Install LH 2nd row seat buckle split closeout assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x clips, 1x datum
  20. Install LH 2nd row cushion assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    6x clips, Lower onto seat frame
  21. Install LH 2nd row seat underbelly
    Informational PurposesAn informational icon, calling your attention
    Nota
    8x clips, Push inwards to engage clips
  22. Secure LH 2nd row cushion to underbelly
    Informational PurposesAn informational icon, calling your attention
    Nota
    Secure plastic retainers in channel
  23. Install LH 2nd row seat cushion outboard cover
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x clip, Pull outward from lower forward section to release
  24. Fold up 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull tether to release then lift up until locked in place
  25. Connect LH 2nd row cushion assembly connectors
    Informational PurposesAn informational icon, calling your attention
    Nota
    3x connectors, 5x clips
  26. Install rear wall lower trim
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x push clips, 4x clips
  27. Fold down 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull tether to release then pivot down until locked in place
  28. Fold down 2nd row 60 seat
    Informational PurposesAn informational icon, calling your attention
    Nota
    Pull tether to release then pivot down until locked in place
  29. Install LH lower C-pillar tr
    Informational PurposesAn informational icon, calling your attention
    Nota
    3x clips, 7x tabs, 4x datums
  30. Secure LH rear primary door seal
  31. Install 2nd row seatback LH outboard bolster
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x tabs, 1x datum, 3x clips, Position LH outboard bolster into place, Ensure all clips and tabs are fully engaged, Replace any missing or damaged clips, Secure LH 2nd row shoulder cover, Perform push-pull-push test
  32. Raise LH rear window
  33. Close LH rear door
  34. Install RH lower C-pillar trim
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x clip, 1x datum
  35. Raise RH rear window
  36. Close RH rear door