2024-11-25

Tire Pressure Monitoring System (TPMS) - Tire Pressure Monitor Sensor (Inspection)

Código de corrección NA NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a LaborTimeFeedback@tesla.com. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.

Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Este procedimiento están en fase PRELIMINAR. Aunque se ha validado, es posible que falten advertencias y precauciones. Siga los requisitos de seguridad y tenga mucho cuidado cuando trabaje en sistemas y componentes de alta tensión o cerca de ellos. Envíe sus correcciones y comentarios a ServiceDevelopment@teslamotors.com.
Informational PurposesAn informational icon, calling your attention
Nota
Para saber cómo actualizar el firmware de la herramienta de activación del TPMS, consulte las instrucciones del fabricante. Los empleados de Tesla pueden acceder aquí para la herramienta TT02 y aquí para la herramienta TT03.
  1. Remove the LH front wheel cover. See Wheel Cover - Front - LH (Remove and Install).
  2. Perform connection test on LH front TPMS sensor.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Via wake tool > Conn Test > Hold wake tool near valve stem then press trigger button. If sensor fails to connect then try again. If sensor fails to connect again then proceed to troubleshooting steps. If sensor connects then proceed with current procedure.
  3. Verify LH front TPMS sensor FW ID.
    Informational PurposesAn informational icon, calling your attention
    Nota
    CT is B78D3739. S3XY is 69B19007. If FW ID is not for CT then record TPMS ID and FW ID and proceed to TPMS replacement procedure. See Tire Pressure Monitor Sensor - LH (Remove and Replace).
  4. Troubleshoot LH front TPMS sensor connection failure by lowering RSSI threshold.
    Informational PurposesAn informational icon, calling your attention
    Nota
    If sensor connected then skip this step. Reposition wake tool as needed. Via wake tool > Settings > RSSI. Negative threshold will pick up weak signal. Lower threshold then try connection again. If sensor fails to connect again then proceed to increasing LF power steps.
  5. Troubleshoot LH front TPMS sensor connection failure by increasing LF power.
    Informational PurposesAn informational icon, calling your attention
    Nota
    If sensor connected then skip this step. Reposition wake tool as needed. Via wake tool > Settings > LF Power. Change to high then try connection again. If sensor fails to connect again then escalate.
  6. Repeat step 1 through step 5 for the remaining wheels.
  7. Install the the wheel covers that have been removed. See Wheel Cover - Front - LH (Remove and Install).