2026-03-03

Blower - Cushion - Front Seat - LH (Remove and Replace)

Código de corrección 1301010312 0.12 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección y el FRT mencionados anteriormente reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento. NOTA: Consulte Precauciones ergonómicas para ver información sobre prácticas de trabajo seguras.

Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Este procedimiento están en fase PRELIMINAR. Aunque se ha validado, es posible que falten advertencias y precauciones. Siga los requisitos de seguridad y tenga mucho cuidado cuando trabaje en sistemas y componentes de alta tensión o cerca de ellos.
  • 2026-02-02: Released new procedure.

Retirar

  1. Abra la puerta delantera izquierda.
  2. Raise the LH front seat to maximum height.
  3. Disconnect cushion blower electrical connector.
  4. Release the clips (x2) that attach the cushion blower to the seat assembly, and then remove the blower from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Push the clips in, pull the blower downward, then slide the blower forward.

Instalar

  1. Position the cushion blower into the seat assembly, and then engage the clips (x2) that attach the blower to the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Insert alignment tab, and then push upwards to engage the clips.
  2. Connect the cushion blower electrical connector.
  3. Vuelva a colocar el asiento delantero izquierdo en su posición original.
  4. Cierre la puerta delantera izquierda.