Corner Bracket - LH - Fabric Tonneau (Long Range) (Remove and Install)
Código de corrección
NEW
NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga.
NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a ServiceManualFeedback@tesla.com.
NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.
- 2025-06-21: Released new procedure.
-
Open tailgate
NotaPress button to release
-
Remove LH sail applique
Nota15x clips, 1x connector, 1x harness clip, Lift rear edge first to remove connector and harness clip
-
Remove LH upper bed side wall assembly
Nota13x clips, Start from rear, Pull from the bottom downwards
-
Remove LH tonneau cam block
Nota2x bolts, 8mm, 10Nm
-
Remove LH Tonneau horizon rail assembly
Nota4x bolts, 8 mm, 10Nm, 5x bolts, 10 mm, 10Nm
-
Remove tonneau upper applique
Nota4x bolts, T25, 10Nm, Release lower bolts, Pivot applique upwards, Release pivot bolts, Remove applique
-
Remove LH tonneau applique hinge pivot
Nota1x bolt, T25, 10Nm
-
Remove tonneau lower applique
Nota2x bolts, T30, 10Nm
-
Remove LH tonneau corner bracket
Nota1x bolt, 10mm, 10Nm, 1x nut, 10mm, 10Nm
-
Install LH tonneau corner bracket
Nota1x bolt, 10mm, 10Nm, 1x nut, 10mm, 10Nm
-
Install tonneau lower applique
Nota2x bolts, T30, 10Nm
-
Install LH tonneau applique hinge pivot
Nota1x bolt, T25, 10Nm
-
Install tonneau upper applique
Nota4x bolts, T25, 10Nm, Install pivot bolts, Pivot applique downwards, Install lower bolts,
-
Install LH Tonneau horizon rail assembly
Nota4x bolts, 8 mm, 10Nm, 5x bolts, 10 mm, 10Nm
-
Install LH upper bed side wall assembly
Nota13x clips, Replace any missing or damaged clips, Lift tonneau seal as required
-
Install LH tonneau cam block
Nota2x bolts, 8mm, 10Nm
-
Install LH sail applique
Nota15x clips, 1x connector, 1x harness clip, Replace any broken clips
- Close tailgate