2026-07-02

Seat Assembly - 2nd Row (Remove and Replace)

Código de corrección 13050401201 13050401202 FRT 1.74 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección y el FRT mencionados anteriormente reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento. NOTA: Consulte Precauciones ergonómicas para ver información sobre prácticas de trabajo seguras.

Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Este procedimiento están en fase PRELIMINAR. Aunque se ha validado, es posible que falten advertencias y precauciones. Siga los requisitos de seguridad y tenga mucho cuidado cuando trabaje en sistemas y componentes de alta tensión o cerca de ellos.
Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Los componentes electrónicos del Cybertruck están alimentados por una arquitectura de media tensión de 48 V diseñada para mejorar la eficiencia. El mantenimiento de los componentes de media tensión requiere un conocimiento y cuidado adicionales para evitar daños personales o en el vehículo. Lea y comprenda las precauciones relacionadas con la media tensión en Precauciones eléctricas y asegúrese de realizar todos los cursos de formación necesarios, según corresponda.
  • 2026-06-12: Released new procedure.

Desinstalar

  1. Open all four doors
  2. Lower all four windows
  3. Manually latch all doors to prevent lockout
    Informational PurposesAn informational icon, calling your attention
    Nota
    Engage latch with screwdriver
  4. Enter Service Mode. See Modo de servicio.
  5. Raise and move LH front seat forward
  6. Move RH front seat forward
  7. Disconnect MV power. See Mid-Voltage Power (Disconnect and Connect) (Modify).
  8. Close LH and RH visors and retract LH and RH windshield shade assemblies
  9. Remove the LH and RH 2nd row seatback shoulder covers. See Shoulder Cover - LH - 2nd Row Seat (Remove and Install).
  10. Remove the rear vehicle controller. See Body Controller - Rear (Remove and Install).
  11. Release all connections from charge port ecu
    Informational PurposesAn informational icon, calling your attention
    Nota
    3x connectors
  12. Remove charge port ECU
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x bolts, 10 mm, 5 Nm, 2x tabs
  13. Release 2nd row center retractor from 2nd LH row buckle
    Informational PurposesAn informational icon, calling your attention
    Nota
    Push red release mechanism to release retractor
  14. Remove bolts securing 2nd row seat back onto the back wall
    Informational PurposesAn informational icon, calling your attention
    Nota
    4x bolts, 10mm, 9 Nm, 2x bolts, 10mm, 7 Nm
  15. Remove bolts securing lower 2nd row full seat assembly onto the back wall
    Informational PurposesAn informational icon, calling your attention
    Nota
    8x bolts, 15mm, 50 Nm
  16. Remove bolts securing LH and center/RH 2nd row buckle onto 2nd row seat assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x bolts, 15mm, 40 Nm
  17. Remove bolts securing 2nd row seat assembly onto vehicle structural frame
    Informational PurposesAn informational icon, calling your attention
    Nota
    4x bolts, 15mm, 50 Nm
  18. Remove LH 2nd row shoulder cover
    Informational PurposesAn informational icon, calling your attention
    Nota
    7x clips, 1x datum
  19. Release RH 2nd row shoulder cover
    Informational PurposesAn informational icon, calling your attention
    Nota
    7x clips, 1x datum
  20. Release 2nd row center seat belt from 2nd row seat assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x button
  21. Remove 2nd row seat assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    Recommend assistance

Instalar

  1. Install 2nd row seat assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    Assistance recommended for safe installation onto frame
  2. Install 2nd row center seat belt onto 2nd row seat assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x button
  3. Install RH 2nd row shoulder cover
    Informational PurposesAn informational icon, calling your attention
    Nota
    7x clips, 1x datum
  4. Install LH 2nd row shoulder cover
    Informational PurposesAn informational icon, calling your attention
    Nota
    7x clips, 1x datum
  5. Install bolts securing 2nd row seat assembly onto vehicle structural frame
    Informational PurposesAn informational icon, calling your attention
    Nota
    4x bolts, 15mm, 50 Nm
  6. Install the rear vehicle controller. See Body Controller - Rear (Remove and Install).
  7. Install bolts securing LH and center/RH 2nd row buckle onto 2nd row seat assembly
    Informational PurposesAn informational icon, calling your attention
    Nota
    2x bolts, 15mm, 40 Nm
  8. Install bolts securing lower 2nd row full seat assembly onto the back wall
    Informational PurposesAn informational icon, calling your attention
    Nota
    8x bolts, 15mm, 50 Nm
  9. Install bolts securing 2nd row seat back assembly onto the back wall
    Informational PurposesAn informational icon, calling your attention
    Nota
    4x bolts, 10mm, 9 Nm, 2x bolts, 10mm, 7 Nm
  10. Secure 2nd row center retractor onto 2nd LH row buckle
    Informational PurposesAn informational icon, calling your attention
    Nota
    Push red release mechanism to release retractor
  11. Install charge port ECU
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x bolt, 10 mm, 5 Nm, 2x tabs, Align charge port ecu into cavity for installation
  12. Secure all connections to charge port ecu connectors
    Informational PurposesAn informational icon, calling your attention
    Nota
    3x connectors
  13. Reinstall all components that were removed for access. See Shoulder Cover - LH - 2nd Row Seat (Remove and Install).
  14. Connect mid-voltage power. See Mid-Voltage Power (Disconnect and Connect) (Modify).
  15. Move RH front seat to original position
  16. Lower and move LH front seat to original position
  17. Exit Service Mode. See Modo de servicio.
  18. Raise all four windows.
  19. Close all four doors.