03/06/2024 17:05:16

Seal - Primary - Front Door - LH (Remove and Replace)

Code de correction 11700302

  • 2024-03-19: Added an image to indicate the seal junction to aid seal installation.

Dépose

  1. Open the front door.
  2. Apply masking tape on the A-pillar to indicate the location of the junction of the seal near the door quarter glass.
  3. Carefully release the seal, starting from the rocker panel and working towards the upper section of the seal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Des composants ont été omis de ce graphique par souci de clarté.
  4. Remove the seal from the vehicle.

Installation

La procédure d’installation est l’inverse de la procédure de retrait, à l’exception de ce qui suit :

Informational PurposesAn informational icon, calling your attention
Note
Nettoyez les zones touchées avant l'installation.
  1. Make sure that the junction of the seal is installed as indicated by the masking tape that was applied during removal.
  2. Ensure that the lip of the seal is seated properly.
    Tip : Use a silicone based lubricant to aid installation, if necessary.