2026-08-09

Absorber - Wheelhouse - Rear - RH (Remove & Replace)

Code de correction 15307202

Retrait

Perform Vehicle HV Disablement Procedure. See Procédure de désactivation HT du véhicule
Remove the rear HVAC assembly (voir la procédure)).
Make slits in the RH rear wheelhouse absorber near the rear HVAC assembly to aid with removal.

Remarque
2x slit on marked positions. It is not necessary to disconnect the coolant hose.

ATTENTION
Take care not to damage the coolant hose.
Release the wiring harness and coolant hose clips from the RH rear vehicle body.
Disconnect the RH rear C-pillar acceleration sensor.
Move electrical harnesses and coolant hose out of the way, and then remove the RH rear wheelhouse absorber.

La procédure d’installation est l’inverse de la procédure de retrait, à l’exception de ce qui suit :

Recharge the A/C system (voir la procédure).

Remarque
After A/C refrigerant charging is finished, make sure that the A/C system functions correctly.
Calibrate the falcon doors (voir la procédure).