21/12/2022 09:02:17

Pieza fundida - Plataforma - Asiento de la 2.ª fila - Lado izquierdo (7 plazas) (Desinstalación y sustitución)

Código de corrección 13020132 0.36 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga.NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a LaborTimeFeedback@tesla.com. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.

Retirar

  1. Remove the LH 2nd row seat assembly from the vehicle. See Conjunto de asiento - 2.ª fila - Lado izquierdo (7 plazas) (Desinstalación y sustitución).
  2. Remove the push clip from the front of the LH 2nd row seat outer sideshield assembly.
    Consejo: Use a pick to remove the push clip from the bottom side of the outboard cover.
  3. Release the clip that attaches the LH 2nd row seat outer sideshield to the seat assembly, disconnect the electrical connector, and then remove the sideshield from the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Release the outer sideshield assembly by pulling outwards and up at the front portion of the trim, and then releasing the remaining clip.
  4. Release the clips (x3) that attach the LH 2nd row seat inboard outer trim to the seat assembly, and then remove the trim from the seat assembly.
  5. Remove the seat pan fastener from the LH front of the LH 2nd row seat.
    6 Nm (4.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x fastener,10mm, 6Nm
    Consejo: Se recomienda utilizar las siguientes herramientas:
    • 10 mm socket
  6. Release the clips (x2) that attach the front of the LH 2nd row seat cushion to the seat assembly, and then lift the front edge of the seat cushion to access the podium fasteners.
  7. Remove and discard the bolts (x2) and release the harness clip that attach the LH 2nd row seat podium casting to the seat assembly, and then remove the casting from the seat assembly.
    37 Nm (27.3 lbs-ft)
    Consejo: Se recomienda utilizar las siguientes herramientas:
    • 11 mm socket

Instalar

  1. Position the LH 2nd row seat podium casting into the seat assembly, and then secure the harness clip and install new bolts (x2) that attach the casting to the seat assembly.
    37 Nm (27.3 lbs-ft)
    Consejo: Se recomienda utilizar las siguientes herramientas:
    • 11 mm socket
  2. Position the front edge of the LH 2nd row seat cushion onto the seat assembly, and then install the clips that attach the cushion to the seat assembly.
  3. Install the seat pan fastener to the LH front of the LH 2nd row seat.
    6 Nm (4.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x fastener,10mm, 6Nm
    Consejo: Se recomienda utilizar las siguientes herramientas:
    • 10 mm socket
  4. Position the LH 2nd row seat outer sideshield to the seat assembly, connect the electrical connector, and then secure the clip that attaches the sideshield to the seat assembly.
  5. Install the push clip at the front of the LH 2nd row seat outer sideshield assembly.
  6. Position the LH 2nd row seat inboard outer trim onto the seat assembly, and then secure the clips (x3) that attach the trim to the seat assembly.
  7. Install the LH 2nd row seat assembly. See Conjunto de asiento - 2.ª fila - Lado izquierdo (7 plazas) (Desinstalación y sustitución).