2025-02-09

Bras d’essuie-glace - gauche (retrait et remplacement)

Code de correction 17500302 0,05 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. Vous pouvez transmettre par courriel vos commentaires relatifs aux valeurs des temps forfaitaires au LaborTimeFeedback@tesla.com. NOTE: Consultez Protection individuelle pour vous assurer de porter l’ÉPI approprié lorsque vous effectuez la procédure ci-dessous.

  • 2025-01-28: Corrected torque value for wiper arm nut from 32 Nm to 25 Nm.

Retirer

  1. Open the LH front door and lower the LH front window.
  2. Remove the rear underhood apron. See Tablier sous le capot - arrière (retirez et remplacez).
  3. Release the LH wiper arm hose nozzle.
  4. Remove the LH wiper arm nut cover.
  5. Remove the nut that attaches the LH wiper arm to the vehicle, and then use a wiper arm removal tool to remove the wiper arm from the vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    ATTENTION
    Do not flex the wiper arm to remove it.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Lower the hood slightly to fit the wiper arm removal tool.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Douille de 15 mm
    • Wiper Arm Removal Tool - 1058696-00-A

Installer

  1. Position the LH wiper arm into the vehicle, and then install the nut that attaches the wiper arm to the vehicle.
    25 Nm (18.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Douille de 15 mm
  2. Install the LH wiper arm nut cover.
  3. Attach the LH wiper arm hose nozzle.
  4. Install the rear underhood apron. See Tablier sous le capot - arrière (retirez et remplacez).
  5. Raise the LH front window and close the LH front door.