2023-07-18

Mécanisme - pivot - écran tactile (retrait et remplacement)

Code de correction 21051222 0.42 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. Vous pouvez transmettre par courriel vos commentaires relatifs aux valeurs des temps forfaitaires au LaborTimeFeedback@tesla.com. NOTE: Consultez Protection individuelle pour vous assurer de porter l’ÉPI approprié lorsque vous effectuez la procédure ci-dessous.

  • 2023-06-28: Added option links to remove HW3 touchscreen and HW4 touchscreen.

Retirer

  1. Remove the touchscreen.
  2. Remove and discard the bolts (x2) that attach the touchscreen pivot mechanism to the display housing.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Rallonge de 2 po
    • Douille de 10 mm
    • Clé à cliquet à tête flexible/clé dynamométrique à tête flexible
  3. Remove the touchscreen pivot mechanism from the display housing.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Lift and tilt the mechanism off of the display housing.

Installer

  1. Position the touchscreen pivot mechanism on the display housing.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Tilt and lower the mechanism onto the display housing. Ensure the plastic washers are present.
  2. Install the new bolts (x2) that attach the touchscreen pivot mechanism to the display housing.
    10 Nm (7.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Rallonge de 2 po
    • Douille de 10 mm
    • Clé à cliquet à tête flexible/clé dynamométrique à tête flexible
    • Clé à cliquet/Clé dynamométrique
  3. Install the touchscreen.