2023-09-26

Ensemble de carénage – arrière – inférieur (retrait et remplacement)

Code de correction 10012902 0.78 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. Vous pouvez transmettre par courriel vos commentaires relatifs aux valeurs des temps forfaitaires au LaborTimeFeedback@tesla.com. NOTE: Consultez Protection individuelle pour vous assurer de porter l’ÉPI approprié lorsque vous effectuez la procédure ci-dessous.

Retirer

  1. Remove the rear fascia assembly from the vehicle. See Carénage - arrière (retrait et installation).
  2. Release the park assist harness from the rear lower fascia.
  3. Remove the screws (x4) that attach the upper rear fascia assembly to the lower rear fascia assembly.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Douille de 10 mm
  4. Release the tabs (x21) that attach the upper rear fascia assembly to the lower rear fascia assembly, and then remove the upper assembly from the lower assembly.
  5. Remove the trailer hitch cover. See Couvercle - attelage de remorque (retrait et remplacement).
  6. Remove the bolts (x6) that attach the lower rear fascia to the rear diffuser.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Douille de 10 mm
  7. Release the tabs (x8) that attach the lower rear fascia to the rear diffuser.
  8. Remove the LH and RH rear reflex lamps. See Feu - réflecteur - arrière - gauche (retrait et remplacement).

Installer

  1. Install the LH and RH rear reflex lamps. See Feu - réflecteur - arrière - gauche (retrait et remplacement).
  2. Position the lower rear fascia to the rear diffuser, and then secure the tabs (x8).
  3. Install the bolts (x6) that attach the lower rear fascia to the rear diffuser.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Douille de 10 mm
  4. Remove the trailer hitch cover. See Couvercle - attelage de remorque (retrait et remplacement).
  5. Position the upper rear fascia assembly onto the lower rear fascia assembly, and then secure the tabs (x21) that attach the upper assembly to the lower assembly.
  6. Install the screws (x4) that attach the upper rear fascia assembly to the lower rear fascia assembly.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Nous recommandons l’utilisation des outils suivants :
    • Douille de 10 mm
  7. Install the clip that attaches the park assist harness to the rear lower fascia.
  8. Install the rear fascia onto the vehicle. See Carénage - arrière (retrait et installation).