2024-06-03

Garniture - seuil - coffre (retrait et remplacement)

Code de correction 15244802 0.06 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. Vous pouvez transmettre par courriel vos commentaires relatifs aux valeurs des temps forfaitaires au LaborTimeFeedback@tesla.com. NOTE: Consultez Protection individuelle pour vous assurer de porter l’ÉPI approprié lorsque vous effectuez la procédure ci-dessous.

Retirer

  1. Remove the rear trunk load floor. See Plancher de chargement du coffre - arrière (retirez et remplacez).
  2. Remove the LH and RH side rear trunk garnish. See Garniture - coffre arrière - latérale - gauche (retrait et remplacement).
  3. Remove and discard the bolts (x2), and release the clips (x4), that attach the trunk sill trim to the body, and then remove the trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • T25 socket

Installer

  1. Install the trunk sill trim to the body, and then fasten the clips (x4) and install new bolts (x2) to attach the trim to the body.
    2.5 Nm (1.8 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • T25 socket
  2. Install the LH and RH side rear trunk garnish. See Garniture - coffre arrière - latérale - gauche (retrait et remplacement).
  3. Install the rear trunk load floor. See Plancher de chargement du coffre - arrière (retirez et remplacez).