2026-07-02

Basic Vehicle Inspection (Inspection)

Code de correction 00030700 FRT 1.14 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire indiqués ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. NOTE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lorsque vous effectuez la procédure ci-dessous. REMARQUE : Voir Précautions ergonomiques pour consulter les pratiques de travail sécuritaires et saines.

Warning IconA warning icon, calling your attention to a possibly risky situation
Avertissement
Cette procédure est une PREMIÈRE VERSION. Bien qu'elle ait été validée, des avertissements et des mises en garde pourraient manquer. Respectez les exigences de sécurité et faites preuve d’une extrême prudence lorsque vous travaillez sur ou près des systèmes et des composants haute tension.
  • 2026-06-18: Released new procedure.

Procedure

  1. Function check LH front door (exterior)
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note any abnormalities
  2. Function check all windows from the master switch
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check operation with door closed, Document any abnormal operation/noises
  3. Function check LH rear door (exterior)
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Inspect and note functionality for the door handle operation, and full range of motion of the door, From outside look for interference with brightwork and door to body, Function test closing button on door, Note noises such as creaks, groans and clicks, pauses or incomplete actions
  4. Function check RH rear door (exterior)
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Inspect and note functionality for the door handle operation, and full range of motion of the door, From outside look for interference with brightwork and door to body, Function test closing button on door, Note noises such as creaks, groans and clicks, pauses or incomplete actions
  5. Function check RH front door (exterior)
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Inspect and note functionality for the door handle operation and full range of motion of the door, From outside look for interference with brightwork and door to body, Note any abnormalities
  6. Function check the exterior lights
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Recommend assistance, Check headlamps, fog lights, license plate, tail, brake, reverse, and side repeaters
  7. Engage drive rails and activate windshield washer and wiper operation
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Engage drive rails and hold down on the washer button, Verify wipers and washer is operating as intended
  8. Function check horn
  9. Open the hood.
  10. Remove the rear underhood apron.
  11. Remove the RH underhood apron.
  12. Remove the LH underhood apron.
  13. Remove the front underhood apron.
  14. Remove the underhood storage unit access panel.
  15. Remove the underhood storage unit carpet.
  16. Remove the underhood storage unit from the vehicle.
  17. Perform inspection of under hood area
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Perform inspection of vehicle under hood area, Check for signs of abnormal damage, wear, heavy rust, wiring damage, or impact damage, Pay attention to safety related component and note any items of significance
  18. Inspect brake fluid level
  19. Inspect coolant level and top off as necessary
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Ensure that the fluid level is at the Max line, Top off fluid as required
  20. Fill washer fluid reservoir
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Fill the reservoir until the fluid level is visible just below the filler neck
  21. Raise and support the vehicle.
  22. Raise vehicle fully and lower lift onto locks
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Set vehicle to comfortable working height, Ensure an audible click of locks on both sides is heard before lowering, Vehicle may tilt to the side if both locks are not engaged
  23. Remove push clips securing front aero shield
    Informational PurposesAn informational icon, calling your attention
    Remarque
    5x push clips
  24. Remove bolts securing front aero shield and remove from vehicle
    Informational PurposesAn informational icon, calling your attention
    Remarque
    9x bolts, 10mm, 6 Nm
  25. Release mid aero shield
    Informational PurposesAn informational icon, calling your attention
    Remarque
    4x push clips
  26. Remove mid aero shield
    Informational PurposesAn informational icon, calling your attention
    Remarque
    16x bolts, 10mm, 6 Nm
  27. Check tire pressures
    Informational PurposesAn informational icon, calling your attention
    Remarque
    4x tires, Adjust to specification if necessary
  28. Measure and record RH front tread depth
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Record at least 3 measurements: Inner, Middle, Outer, Add line to replace if under 5/32 inch tread remaining
  29. Measure and record RH front brake pad thickness
  30. Inspect RH front brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check for excessive rust or wear, Minimum spec 30mm
  31. Measure and record RH rear tread depth
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Record at least 3 measurements: Inner, Middle, Outer, Add line to replace if under 5/32 inch tread remaining
  32. Measure and record RH rear brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Add line to replace if under 5mm
  33. Inspect RH rear brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check for excessive rust or wear, Minimum spec 26mm
  34. Measure and record LH rear tread depth
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Record at least 3 measurements: Inner, Middle, Add line to replace if under 5/32 inch tread remaining
  35. Measure and record LH rear brake pad thickness
  36. Inspect LH rear brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check for excessive rust or wear, Minimum spec 26mm
  37. Measure and record LH front tread depth
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Record at least 3 measurements: Inner, Middle, Outer, Add line to replace if under 5/32 inch tread remaining
  38. Measure and record LH front brake pad thickness
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Add line to replace if under 5mm
  39. Inspect LH front brake rotor condition
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check for excessive rust or wear, Minimum spec 30mm
  40. Perform inspection of vehicle underside components front and rear
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Perform inspection of vehicle underside front and rear, Check for signs of abnormal damage, wear, heavy rust, wiring damage, or impact damage, Pay attention to safety related component and note any items of significance
  41. Inspect underside of vehicle for fluid leaks
  42. Perform inspection of steering components
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check steering gear joints, fasteners, and electrical connections, Verify components are not bent or damaged
  43. Perform inspection of suspension components
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check conditions of ball joints and bushings, etc, Inspect for any loose fasteners, Carefully apply pressure with a pry bar as needed
  44. Perform inspection of front suspension components
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check conditions of ball joints and bushings, etc, Inspect for any loose fasteners, Carefully apply pressure with a pry bar as needed
  45. Perform inspection of rear suspension components
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Check conditions of ball joints and bushings, etc, Inspect for any loose fasteners, Carefully apply pressure with a pry bar as needed
  46. Inspect underside of battery for damage
  47. Install mid aero shield
    Informational PurposesAn informational icon, calling your attention
    Remarque
    16x bolts, 10mm, 6 Nm, Apply Loctite 222 onto mid aero shield bolts and install fasteners securing mid aero shield to vehicle
  48. Position mid aero shield
    Informational PurposesAn informational icon, calling your attention
    Remarque
    4x push clips
  49. Apply Loctite 222 onto front aero shield bolts and secure front aero shield to vehicle
    Informational PurposesAn informational icon, calling your attention
    Remarque
    9x bolts, 10mm, 6 Nm
  50. Install push clips securing front aero shield
    Informational PurposesAn informational icon, calling your attention
    Remarque
    5x push clips
  51. Lower vehicle fully
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Raise lift off locks, then hold lock release lever to keep locks free while vehicle is lowered
  52. Lower and remove the vehicle from the lift.
  53. Install the underhood storage unit.
  54. Install the underhood storage unit carpet.
  55. Install the underhood storage unit access panel.
  56. Install the front underhood apron.
  57. Install the LH underhood apron.
  58. Install the RH underhood apron.
  59. Install the rear underhood apron.
  60. Close the hood.
  61. Perform a road test using a series of ABS-active stops and ensure proper brake pedal feel and performance
    Informational PurposesAn informational icon, calling your attention
    Remarque
    The vehicle must stop completely within 25 feet (7.6 meters) at 20 mph (32 kph), Confirm that no excessive vibration or noise is present
  62. Inspect vehicles alignment
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Confirm steering wheel is straight and no vibrations or noises are felt or heard from the suspension, On a flat road, at 35 mph (56 kph), the vehicle does not pull in either direction