High Voltage 3-Phase Harness - AC Inlet (Remove and Install)
Código de corrección
4450010102
FRT
0.60
NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga.
NOTA: Consulte Tiempos de tarifa plana (FRT) para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a ServiceManualFeedback@tesla.com.
NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.
NOTA: Consulte Precauciones ergonómicas para ver información sobre prácticas de trabajo seguras.
Retirar
- Perform Vehicle HV Disablement Procedure. See Procedimiento de desactivación de la alta tensión del vehículo.
- Remove the LH trunk side trim. See Trunk Side Trim LH - Rear Under Body (Remove and Replace).
-
Disconnect charge port logic
connector.
-
Disconnect AC inlet harness from
charge port.
-
Disconnect AC chargeport inlet harness
from HV header.
-
Release LH body harness from rear body
and move aside.
-
Remove HV inlet harness from
vehicle.
Instalar
-
Install HV inlet harness into vehicle.
-
Connect 3PH chargeport inlet harness to HV header.
-
Install LH body harness onto rear body.
-
Connect AC inlet harness from charge port.
-
Connect charge port logic connector.
- Install the LH trunk side trim. See Trunk Side Trim LH - Rear Under Body (Remove and Replace).
- Connect LV power. See LV Power (Disconnect and Connect) (Modify).
- Install the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
- Move LH and RH front seat to original position.
- Raise all windows.
- Close liftgate and all four doors.