2026-04-30

2nd Row Seat Harness- RH (7 Seater) (Remove and Replace)

Código de corrección 1710080701 1710080702 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección y el FRT mencionados anteriormente reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento. NOTA: Consulte Precauciones ergonómicas para ver información sobre prácticas de trabajo seguras.

  • 2026-01-26: Released new procedure.

Retirar

  1. Open RH front door.
  2. Lower RH front window.
  3. Open RH rear door.
  4. Lower RH rear window.
  5. Move RH front seat forward.
  6. Fold 2nd row RH seatback down.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Protect seat back upholstery if necessary.
  7. Move RH seat forward using towel bar.
    Informational PurposesAn informational icon, calling your attention
    Nota
    With one hand on towel bar pull up and slide the seat forward with your other hand.
  8. Remove 2nd row RH seat backpanel.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Lift up at the top left corner of RH pack panel to release clips and then slide forward to release hooks.
  9. Remove RH shoulder switch from RH seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Using plastic trim tool pry the top of the switch away from 40 seat assembly to ease removal.
  10. Remove RH seat toe kick cover.
  11. Remove easy-entry switch.
  12. Remove RH seat back harness.
  13. Remove 2nd row seat RH seat harness from seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use a pry tool to release shoulder switch connection from between seatback and frame.

Instalar

  1. Route and install 2nd row seat RH seat harness onto seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use a pry tool to insert shoulder switch connection between seatback and frame.
  2. Install RH seat back harness.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Secure harness to harness guide.
  3. Install RH shoulder switch to RH seat assembly.
  4. Install RH seat toe kick cover.
  5. Install RH backpanel onto seat back.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Install back panel clips to seat back frame starting at lower back panel working your way up towards upper back panel.
  6. Move 2nd row RH seatback to vertical position.
  7. Move RH front seat to original position.
  8. Raise RH rear window.
  9. Close RH rear door.
  10. Raise RH front window.
  11. Close RH front door.