2026-08-09

2nd Row B-Cover Center Inner - 7-Seater (Remove and Replace)

Código de corrección 1308020101 1308020102 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección y el FRT asociado reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento. NOTA: Consulte Precauciones ergonómicas para ver prácticas de trabajo seguras.

  • 2026-01-26: Released new procedure.

Retirar

  1. Open all four doors.
  2. Move LH front seat forward.
    Nota
    Adjust seat back if needed to avoid contacting headliner.
  3. Lower all four windows.
  4. Move RH front seat forward.
    Nota
    Adjust seatback if needed to avoid contacting headliner.
  5. Fold 2nd row 60 seatback down.
  6. Remove center seatback headrest.
    Nota
    Simultaneously depress the guide button and insert a 90 degree pick into the guide opening, and lift up while engaged.
  7. Remove center backpanel from 2nd row center seatback.
    Nota
    Lift up at the lower 20 backpanel and then slide forward to release.
  8. Remove center seatback lumbar bun fastener.
    Nota
    1x screw, T20, 1.5 Nm
  9. Remove push clip from trim.
    Nota
    1x clip, Remove trim clip from cover

Instalar

  1. Install center inner cover.
    Nota
    Install inner cover ensuring the clips seat to outer cover.
  2. Install push clip to trim.
  3. Install center seatback lumbar bun.
    Nota
    Press seatback lumbar bun into center frame.
  4. Fold 2nd row 60 seatback down.
  5. Install center seatback lumbar bun fastener.
    Nota
    1x screw, T20, 1.5 Nm.
  6. Insert backpanel hooks (X2) into center seat back assembly.
    Nota
    Engage hooks and slide rearward into position, early production have 4x hooks.
  7. Install 2nd row center headrest.
  8. Return 2nd row 60 seatback to vertical position.
  9. Move RH front seat to original position.
  10. Move LH front seat to original position.
  11. Raise all four windows.
  12. Close all four doors
    Nota
    If LV is powered up then unlatch rear doors before closing.