Discos de freno - Parte delantera - Juego (Desinstalación y sustitución)
Código de corrección
33011302 0.42
NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga.
NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a ServiceManualFeedback@tesla.com.
NOTA: Consulte Protección personal para asegurarse de que lleva puesto el EPI adecuado al realizar el siguiente procedimiento.
- 2025-05-08: Added brake pad burnishing step to be performed after rotor replacement.
Retirar
- Raise and support the vehicle. See Elevación del vehículo - Elevador de 2 columnas.
- Remove both front wheels. See Conjunto de rueda (Desinstalación e instalación).
- Remove the bolt that attaches the brake hose to the LH front knuckle.
-
Remove the LH front brake caliper from the LH front knuckle.
NotaHang the brake caliper from the body of the vehicle with S-hooks.
-
Si está instalado, retire y deseche el perno que fija el rotor del freno al buje.
NotaNo se instalará un perno nuevo.TIpSe recomienda utilizar las siguientes herramientas:
- Vaso de 13 mm
- Repeat step 3 through step 5 for the RH side of the vehicle.
Instalar
-
Position the LH front rotor to the knuckle assembly.
NotaIt is not necessary to install the bolt that attaches the rotor to the hub.
-
Remove the S-hook and install the bolts that attach the LH front brake caliper to the LH front knuckle.
Nota2x bolts, 21mm, 135 Nm
-
Install the bolt that attaches the brake hose to the LH front knuckle.
Nota1x bolt, 10mm, 6 Nm
- Repeat step 1 through step 3 for the RH side of the vehicle.
- Install both front wheels. See Conjunto de rueda (Desinstalación e instalación).
- Lower the vehicle.
- Press the brake pedal to seat the brake pads to the rotors.
-
Asiente los frenos. Consulte Pastillas de freno - Pulido.
NotaDurante la conducción del vehículo, asegúrese de que el tacto y el rendimiento del pedal de freno sean correctos.NotaAñada el código de corrección para el pulido de las pastillas de freno 33013000 como una actividad independiente a la visita de servicio.