2024-04-29
Respaldo - Asiento de la 1.ª fila - Lado izquierdo (asiento deportivo) (Desinstalación y sustitución)
Código de corrección
13041112 0.30
NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga.
NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean.
NOTA: Consulte Protección personal para asegurarse de que lleva puesto el EPI adecuado al realizar el siguiente procedimiento.
Especificaciones de apriete
| Descripción | Valor de apriete | Herramientas recomendadas | Reutilizar/Sustituir | Notas |
|---|---|---|---|---|
| Perno que fija el respaldo del asiento delantero izquierdo al conjunto del asiento |
![]() 5 Nm (3.7 lbs-ft) |
|
Reutilizar |
Retirar
- Remove the driver seat headrest. See Reposacabezas - Asiento del conductor (asiento deportivo) (Desinstalación y sustitución).
- Remove the LH front seat décor assembly. See Panel de decoración - Asiento de la 1.ª fila - Lado izquierdo (asiento deportivo) (Desinstalación y sustitución).
- Remove the LH front seat back panel. See Back Panel - LH (Sport Seat) (Remove and Replace).
- Remove the rear underhood apron. See Faldón del vano del motor - Parte trasera (Desinstalación y sustitución).
- Disconnect LV power. See Alimentación de baja tensión (Desconexión y conexión).
-
Disconnect the LH front seat harness
connectors (x2) from the seat back assembly.
-
Release the clip that attaches the LH
front seat harness to the seat back.
-
Disconnect the LH front lumbar valve
pack electrical connector.
-
Remove the bolt that attaches the LH
front seat back to the seat assembly.
TIpSe recomienda utilizar las siguientes herramientas:
- Extensión de 2 pulg.
- Vaso de 10 mm
- Destornillador de impacto/carraca sin cable
- Llave de carraca/dinamométrica
-
Move the LH front seat seat back away
from the seat frame to allow access to the 2nd row.
-
Disconnect the LH front lumbar motor
electrical connector.
-
Release the clips (x2) that attach the
LH front lumbar motor assembly to the seat assembly.
-
Remove the LH front seat back assembly
from the seat frame.
Instalar
-
Install the LH front seat back
assembly onto the seat frame.
-
Position the LH front lumbar motor poutch onto the seat frame, and then secure the
clips (x2) that attach the assembly to the seat.
-
Connect the LH front lumbar motor electrical connector.
-
Position the LH front seat back
assembly onto the seat frame.
-
Install the bolt that attaches the LH
front seat back to the seat assembly.
5 Nm (3.7 lbs-ft)TIpSe recomienda utilizar las siguientes herramientas:- Extensión de 2 pulg.
- Vaso de 10 mm
- Destornillador de impacto/carraca sin cable
- Llave de carraca/dinamométrica
-
Connect the LH front lumbar valve pack electrical connector.
-
Install the clip that attaches the LH front seat harness to the seat back.
-
Connect the LH front seat harness
connectors (x2) to the seat back assembly.
- Connect LV power. See Alimentación de baja tensión (Desconexión y conexión).
- Install the rear underhood apron. See Faldón del vano del motor - Parte trasera (Desinstalación y sustitución).
- Install the LH front seat back panel. See Back Panel - LH (Sport Seat) (Remove and Replace).
- Install the LH front seat décor assembly. See Panel de decoración - Asiento de la 1.ª fila - Lado izquierdo (asiento deportivo) (Desinstalación y sustitución).
- Install the driver seat headrest. See Reposacabezas - Asiento del conductor (asiento deportivo) (Desinstalación y sustitución).
- Raise the LH front window and close the LH doors.