09/10/2024 00:31:39

Sensor - Wheel Speed - Front - LH (Performance) (Remove and Replace)

Código de corrección 3310030002 FRT 0.24 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a LaborTimeFeedback@tesla.com. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.

Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Este procedimiento están en fase PRELIMINAR. Aunque se ha validado, es posible que falten advertencias y precauciones. Siga los requisitos de seguridad y tenga mucho cuidado cuando trabaje en sistemas y componentes de alta tensión o cerca de ellos. Envíe sus correcciones y comentarios a ServiceDevelopment@teslamotors.com.
  1. Raise and support vehicle
    Informational PurposesAn informational icon, calling your attention
    Nota
    Ensure vehicle is not charging
  2. Remove LH front wheel center cap
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x cap, Pull the inner side of the adjacent 2 claws on the wheel center cap by hands
  3. Loosen LH front wheel nuts
    Informational PurposesAn informational icon, calling your attention
    Nota
    5x nuts, 21mm, 175 Nm
  4. Raise vehicle partially and lower lift onto locks
    Informational PurposesAn informational icon, calling your attention
    Nota
    Set vehicle to a comfortable working height, Make sure there's an audible click of the locks on both sides before lowering, otherwise vehicle may tilt to the side
  5. Remove LH front wheel
    Informational PurposesAn informational icon, calling your attention
    Nota
    5x nuts, 21mm, 175 Nm
  6. Remove the clips that partially securing LH wheel liner to fascia
    Informational PurposesAn informational icon, calling your attention
    Nota
    9x push clips
  7. Partially remove the LF wheel liner
  8. Disconnect LH front wheel speed sensor connector
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x connector, Disengage locking tab
  9. Disconnect LH front damper solenoid connector
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x connector, Disengage locking tab
  10. Release clips securing LH front wheel speed sensor harness
    Informational PurposesAn informational icon, calling your attention
    Nota
    4x tree clips, 1x rubber grommet
  11. Release bolt securing LH front wheel speed sensor to knuckle
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x bolt, T30, 5 Nm
  12. Remove LH front wheel speed sensor from knuckle
  13. Install LH front wheel speed sensor into knuckle
  14. Install bolt securing LH front wheel speed sensor to knuckle
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x bolt, T30, 5 Nm
  15. Install clips securing LH front wheel speed sensor harness
    Informational PurposesAn informational icon, calling your attention
    Nota
    4x tree clips, 1x rubber grommet, Ensure harness is routed correctly to avoid harness contact with moving suspension components
  16. Connect LH front wheel speed sensor connector
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x connector, Engage locking tab
  17. Connect LH front damper solenoid
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x connector, Engage locking tab
  18. Install the LF wheel liner
  19. Install clips securing LH wheel liner to fascia
    Informational PurposesAn informational icon, calling your attention
    Nota
    9x push clips
  20. Install LH front wheel
    Informational PurposesAn informational icon, calling your attention
    Nota
    5x nuts, 21mm, 175 Nm, Start lug nuts by hand before using power tool
  21. Lower vehicle until tires are touching ground
    Informational PurposesAn informational icon, calling your attention
    Nota
    Raise lift off locks, then hold lock release lever to keep locks free while vehicle is lowered
  22. Torque LH front wheel
    Informational PurposesAn informational icon, calling your attention
    Nota
    5x nuts, 21mm, 175 Nm
  23. Install LH front wheel center cap
    Informational PurposesAn informational icon, calling your attention
    Nota
    1x cap, Ensure that the cap is installed in place
  24. Remove lift arms from below vehicle
    Informational PurposesAn informational icon, calling your attention
    Nota
    Lower rack arms fully and remove them from under vehicle