23/06/2017 11:31:19

Trim - Dash - RH

Correction code 15181002

Remove

  1. Pull bottom of airbag cover upwards to break clips (x4) securing cover to dash frame.
    Informational PurposesAn informational icon, calling your attention
    Note
    The four clips securing the passenger airbag trim will break on removal and will need replacing.
  2. Remove lower storage bin (refer to procedure).
  3. Remove screws (x4) securing dash trim to body.
  4. Using two hands, pull trim to release retaining clips from dash.
  5. Remove dash trim.
  6. Remove broken passenger airbag cover securing clips (x4) from dash frame.
  7. Remove broken clips (x4) from passenger airbag cover.
  8. Depress tags (x4) and remove face level vent from dash trim.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Align air vent spigot to dash trim to make sure that the air vent is correctly orientated.
  2. Install new clips to airbag cover.
  3. Carefully align airbag cover clips with holes in dash frame and push cover to secure.