10/02/2017 09:09:31

Coolant Hose - Manifold to Heat Exchanger

Correction code 46012702

Remove

  1. Raise vehicle on 2 post lift (refer to procedure).
  2. Remove RH forward rear wheel arch liner.
  3. Position container to collect coolant.
  4. Release clamps securing feed and return hoses to coolant manifold.
  5. Disconnect hoses from manifold and allow coolant to drain.
  6. Release clamp securing hose to heat exchanger and disconnect hose from heat exchanger.
  7. Use side cutters or a rotary tool, such as a Dremel, to remove and discard clamp securing APS hose to coolant hose. Disconnect APS hose from coolant hose.
  8. Maneuver coolant hose between battery and subframe to remove from vehicle.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Refill and bleed cooling system (refer to procedure).