10/02/2017 09:09:31

Pipe - High Pressure - Compressor to Condenser - Roadster 1.5

Correction code 18032002

Remove

  1. Remove receiver drier (refer to procedure).
  2. Remove insulation pad.
  3. Loosen the high pressure compressor to condenser pipe at the condenser retaining nut (torque 25 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  4. Loosen the high pressure compressor to condenser pipe at the compressor union (torque 25 Nm).
  5. Remove the high pressure compressor to condenser pipe.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace A/C pipe O-rings.