10/02/2017 09:09:31

Trim - Center Console - Roadster 1.5

Correction code 15190902

Remove

  1. Remove driver seat (refer to procedure).
  2. Remove screws (x2) securing grip to park brake lever. Remove park brake grip.
  3. Release rear of cover securing park brake gaiter to center console. Remove cover and gaiter.
  4. Remove gearshift knob.
  5. Remove bolts (x2) securing center console to dash.
  6. Remove bolts (x2) securing center console to mounting bracket.
  7. Loosen nut and bolt securing center console to rear bulkhead.
  8. Raise center console and disconnect connectors (x2) from dash harness.
  9. Slide center console forward to release from lower center console.
  10. Remove center console.
  11. Disconnect ambient light connection and remove lower cover.
  12. Disconnect hazard warning light connector.
  13. Disconnect traction control switch connector.
  14. Remove clips (x5) securing gearshift support to center console and remove gearshift support.
  15. Disconnect gear selector assembly connector.
  16. Remove screws (x4) securing gear selector assembly to center console (torque 2 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not overtighten screws securing gear selector assembly to center console. If the screws are overtightened the gear selector will not operate correctly.
  17. Remove gear selector assembly and collect shims (x4).
  18. Remove HVAC control panel and wiring loom from center console.

Install

Installation procedure is the reverse of removal.