10/02/2017 09:09:31

Hoses - Any - Manifold to Battery

Correction code 46013202

Remove

  1. Raise vehicle on 2 post lift. (refer to procedure).
  2. Position container to collect coolant.
  3. Release clamps securing feed and return hoses to coolant manifold.
  4. Disconnect hoses from manifold and allow coolant to drain.
  5. Use side cutters or a rotary tool, such as a Dremel, to remove and discard clamps (x2) securing coolant hose to manifold and battery.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION

    Make sure not to damage components.

  6. Remove hose from manifold and battery.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Fit new clamps to hose before securing hoses to coolant manifold and battery.
  2. Refill and bleed cooling system (refer to procedure).