10/02/2017 09:09:31

Breather Hose - Heat Exchanger to Reservoir

Correction code 46012602

Remove

  1. Remove RH forward rear wheel arch liner.
  2. Remove decking panel (refer to procedure).
  3. Position container to collect coolant.
  4. Release clamp securing bleed hose to reservoir and release hose from reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Place suitable absorbent material around the affected area to absorb any possible fluid spillage.
  5. Remove clamp from bleed hose and feed hose through grommet in bodyside.
  6. Release clamp securing bleed hose to heat exchanger and remove hose from heat exchanger.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Top-up reservoir with correct specification coolant.