10/02/2017 09:09:31

Coolant Pump

Correction code 46012302

Remove

  1. Raise vehicle on 2 post lift (refer to procedure).
  2. Remove rear RH forward wheel arch liner (refer to procedure).
  3. Position container to collect coolant.
  4. Release clamps securing feed and return hoses to coolant manifold.
  5. Disconnect hoses from manifold and allow coolant to drain.
  6. Release coolant pump from crash foam.
  7. Disconnect coolant pump connector.
  8. Release coolant hose clamp securing heat exchanger hose to pump. Release and disconnect hose from pump.
  9. Release coolant hose clamp securing coolant manifold hose to pump. Release and disconnect hose from pump.
  10. Remove coolant pump.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Refill and bleed cooling system (refer to procedure).