10/02/2017 09:09:31

Damper - Rear - LH

Correction code 31032202

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Remove damper and spring assembly from vehicle (refer to procedure).
  4. Compress spring.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    To avoid serious injury, use appropriate equipment to carry out this operation.
  5. Move bump stop and remove slotted spring retaining collar.
  6. Remove spring from damper.
  7. Remove spring collar from damper.
  8. Remove C-clip from damper (note fitted position).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION

    Make sure not to damage components.

    Informational PurposesAn informational icon, calling your attention
    Note
    Always record quantity and fitted position of shims, washers, locktabs or clips.

Install

Installation procedure is the reverse of removal.