29/12/2017 10:23:16

Pressure Transducer

Correction code 18032902

Remove

  1. Remove condenser rear exit duct (refer to procedure).
  2. Recover the A/C refrigerant.
  3. Disconnect transducer harness connector.
  4. Remove pressure transducer (torque 8 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.

Install

Installation procedure is the reverse of removal.