10/02/2017 09:09:31

Spring and Damper Assembly - Rear - LH

Correction code 31032102

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Remove Nyloc nut and bolt securing spring damper assembly to lower wishbone (torque 45 Nm).
  4. Remove Nyloc nut and bolt securing spring damper assembly to chassis (torque 45 Nm).
  5. Remove damper and spring assembly.

Install

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all nyloc nuts.