10/02/2017 09:09:31

Receiver - Remote Keyless Entry (RKE) / Immobilizer - Roadster 1.5

Correction code 17030902

Remove

  1. Remove upper dash panel (refer to procedure).
  2. Remove cable tie securing RKE antenna wire to column harness. Untie antenna wire from harness and release antenna wire.
  3. Disconnect harness connector from RKE receiver.
    Informational PurposesAn informational icon, calling your attention
    Note
    Apply recommended grease to connector before installation.
  4. Remove screws (x2) securing RKE receiver to dash.
  5. Remove RKE receiver from vehicle.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Program keys to new RKE module before refitting upper dash panel.