10/02/2017 09:09:31

Switch - Starter

Correction code 17050702

Remove

  1. Remove steering wheel (refer to procedure).
  2. Release clips (x2) securing high beam/turn/cruise switch to housing and position switch aside.
  3. Release clips (x2) securing wash/wipe switch to housing and position switch aside.
  4. Remove 2 screws securing switch housing to steering column.
  5. Remove switch housing from column.
  6. Insert starter key and turn switch to ACC position.
  7. Release clip and disconnect harness connector from starter switch.
  8. Remove starter switch retaining screw.
  9. Depress retaining pin and remove switch.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Install retaining pin into lock body.
  2. Install switch and locate pin.