10/02/2017 09:09:31

Spring and Damper Assembly - Front - LH

Correction code 31011102

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Remove Nyloc nut, bolt and washers (x2) securing spring and damper assembly to lower wishbone (torque 45 Nm).
  4. Remove nut, bolt and washers (x2) securing spring and damper assembly to damper bracket, collect spacers (torque 45 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Always record quantity and fitted position of shims, washers, locktabs or clips.
  5. Remove spring and damper assembly.

Install

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all nyloc nuts.