2017-02-10

Bulb - Low Beam

Correction code 17131102

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove bolts (x2) securing headlight access panel to wheel arch liner.
  3. Remove headlight access panel.
  4. Remove cover from rear of headlight.
  5. Rotate bulb holder counterclockwise and remove from headlight.
  6. Disconnect harness connector from bulb.

Install

Installation procedure is the reverse of removal.