10/02/2017 09:09:31

Vacuum Pump

Correction code 33032302

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove front LH lower wheel arch liner (refer to procedure).
  3. Remove cover and NVH foams from vacuum pump.
  4. Release clip securing harness to mounting bracket.
  5. Disconnect harness connector from vacuum pump.
  6. Disconnect hose from vacuum pump.
  7. Remove nuts (x3) securing mounting bracket to crash structure.
  8. Remove nuts and bolts (x3) securing vacuum pump to bracket.
  9. Remove vacuum pump.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Make sure that the servo operates correctly before driving the vehicle.
  2. Make sure that the NVH foams and cover are correctly fitted and secured to the vacuum pump. Incorrectly fitted, or missing NVH foam can result in excessive noise when the pump is operating.