10/02/2017 09:09:31

Solenoid Valve - Heat Exchanger

Correction code 18032802

Remove

  1. Remove RH dash trim (refer to procedure).
  2. Disconnect solenoid valve connector.
  3. Loosen solenoid rear pipe retaining nut (torque 18 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  4. Loosen front pipe union and disconnect pipe from solenoid valve (torque 18 Nm).
  5. Remove bolts (x2) securing solenoid valve to body (torque 10 Nm).
  6. Remove solenoid valve.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace A/C pipe O-rings.