10/02/2017 09:09:31

Shim - Camber Adjustment - Rear

Correction code 31031002

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Remove bolts (x2) securing ball joint carrier to upright. Move wheel speed sensor bracket aside and collect shims (torque 68 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Always record quantity and fitted position of shims, washers, locktabs or clips.
    Informational PurposesAn informational icon, calling your attention
    Note
    When installing, apply Loctite®242™ thread locking compound to bolt/screw threads.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Remove or fit shims to achieve correct camber adjustment.
  2. Perform a wheel alignment.