10/02/2017 09:09:31

Drop Link - Sway Bar - Rear - LH

Correction code 31033402

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Remove Nyloc nut securing drop link to sway bar (torque 45 Nm).
  4. Remove Nyloc nut securing drop link to lower wishbone and release drop link from wishbone (torque 45 Nm).
  5. Remove drop link from sway bar.

Install

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all nyloc nuts.