10/02/2017 09:09:31

Tie Rod End - LH

Correction code 32010302

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Loosen tie rod end locknut (torque 80 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent tie rod damage always restrain tie rod with a wrench when loosening or tightening lock nut.
  4. Remove nut securing tie rod end to steering arm (torque 30 Nm).
  5. Using a suitable tool, release tie rod end from steering arm.
  6. Noting the number of turns required, unscrew tie rod end from tie rod.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Install tie rod end using same number of turns as noted during removal.
  2. Check front toe alignment.