10/02/2017 09:09:31

Solenoid Valve - Evaporator - Roadster 1.5

Correction code 18033202

Remove

  1. Remove receiver drier (refer to procedure).
  2. Remove insulation pad.
  3. Disconnect solenoid valve harness connector.
  4. Loosen solenoid rear pipe retaining nut (torque 18 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  5. Loosen front pipe union and disconnect pipe from solenoid valve (torque 18 Nm).
  6. Pull back insulation to access bracket retaining bolts.
  7. Remove bolts (x2) retaining solenoid valve bracket to body (torque 10 Nm).
  8. Remove solenoid valve and bracket assembly.
  9. Remove bolts (x2) securing solenoid valve to bracket.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace A/C pipe O-rings.