05/07/2017 11:18:07

Brake Disc - Front - LH - Roadster 1.5

Correction code 33010102

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove the wheel (torque 105 Nm).
  3. Release clips (x3) securing wheel speed sensor harness to brake hose.
  4. Remove nut securing brake hose to upper wishbone.
  5. Remove (bolts x2) securing caliper to upright, release caliper (torque 45 Nm). Use the Service S-hook tool to hang the caliper.
    Informational PurposesAn informational icon, calling your attention
    Note
    When installing, apply Loctite®242™ thread locking compound to bolt/screw threads.
  6. Remove screw securing disc to hub and remove disc (torque 20 Nm).

Install

Installation procedure is the reverse of removal, except for the following:

  1. Clean mating face of hub and disc.
  2. Pump brake pedal at least 5 times to seat pads against brake disc.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Always check that brake pads are seated correctly before driving the vehicle.