2017-02-10

Module - TPMS Trigger - Front - LH/RH

Correction code 34011402

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove front wheel arch liner (refer to procedure).
  3. Disconnect harness connector from TPMS trigger module.
  4. Remove nuts (x2) securing TPMS trigger module to fender (torque 5 Nm).
  5. Remove TPMS trigger module.

Install

Installation procedure is the reverse of removal.