23/06/2017 11:31:11

Passenger Airbag

Correction code 17063402

Remove

  1. Remove airbag module (refer to procedure).
  2. Remove screws (x2) securing passenger airbag bracket to dash.
  3. Remove Patchbolts (x4) securing passenger airbag bracket to dash cross member (torque 15 Nm).
  4. Remove nuts (x2) securing passenger airbag cover to bracket (torque 10 Nm).
  5. Remove passenger airbag cover.
  6. Disconnect connector from passenger airbag.
  7. Remove passenger airbag module.
  8. Remove nuts (x4) securing brackets to passenger airbag assembly and remove brackets (torque 6 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Store the airbag module with the deployment side facing up. This will prevent it being propelled if accidentally deployed which may cause injury.

Install

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all patchbolts.