10/02/2017 09:09:31

Coolant Heater

Correction code 46013302

Remove

  1. Remove the Power Electronics Module (PEM).
  2. Remove cable ties (x3) securing coolant heater harness to rear harness.
  3. Position container to catch coolant.
  4. Release clamps securing feed and return hoses to coolant manifold.
  5. Disconnect hoses from manifold and allow coolant to drain.
  6. Release clamp securing coolant hose to heat exchanger and disconnect hose.
  7. Release clamp securing coolant hose to coolant pump and disconnect hose.
  8. Remove coolant heater and hose assembly.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Refill and bleed cooling system (refer to procedure).