10/02/2017 09:09:31

Hood Assembly

Correction code 10091602

Remove

  1. Remove front bumper (refer to procedure).
  2. Mark fitted position of hood hinges to bumper armature.
  3. With assistance support weight of hood.
  4. Remove bolts (x4) securing LH and RH hood hinges to bumper armature.
  5. Remove hood.
  6. Collect hood hinge shims.
    Informational PurposesAn informational icon, calling your attention
    Note
    Always record quantity and fitted position of shims, washers, locktabs or clips.
  7. Remove hood hinges.
  8. Remove bolts (x4) securing hood strikers (x2) to hood and remove strikers.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Position hood hinges in marked locations.
  2. Check alignment of hood to body and adjust as necessary.