2017-02-10

Shroud - Steering Column - Lower

Correction code 14053302

Remove

  1. Remove upper column shroud (refer to procedure).
  2. Remove lower screws (x2) securing lower column shroud to column shroud bracket.
  3. Remove LH upper screw securing lower column shroud to column shroud bracket.
  4. Remove RH upper screw securing lower column shroud to column bracket and release lower column shroud.
  5. Disconnect trip computer switch connector and remove shroud.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Make sure that shroud is installed correctly around column switch gaiters.