10/02/2017 09:09:31

Gear Selector Assembly - Roadster 1.5

Correction code 47051002

Remove

  1. Remove center console (refer to procedure).
  2. Disconnect gear selector assembly connector.
  3. Remove screws (x4) securing gear selector assembly to center console.
  4. Remove gear selector assembly and collect shims (x4).
    Informational PurposesAn informational icon, calling your attention
    Note
    Always record quantity and fitted position of shims, washers, locktabs or clips.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Locate screws (x4) securing gear selector assembly to center console and turn until barely seated.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Tighten screws evenly using a diagonal sequence.