10/02/2017 09:09:31

Headlight - Adjust

Correction code 17130000

Check

  1. Make sure that the vehicle is parked on an even surface.
  2. Check and adjust tire pressures to recommended settings.
  3. Check ride height is to specification. If not rectify any defects before attempting to check headlight alignment.
  4. Align suitable beam setting equipment to headlight.
  5. Switch headlights on to low beam.
  6. Measure beam settings. Beam must be 1.2% below the horizontal and parallel to the vehicle center line.
  7. Align beam setting equipment to second headlight and repeat check.
  8. Switch off headlights and remove beam setting equipment.

Adjust

  1. Remove bolts (x2) securing headlight access panel to wheel arch liner and remove panel.
  2. Turn adjuster as necessary to obtain vertical beam settings.
    Informational PurposesAn informational icon, calling your attention
    Note
    The headlight is adjustable in the vertical axis only.