10/02/2017 09:09:31

Pipe - Low Pressure - Charge Port

Correction code 18032202

Remove

  1. Recover the A/C refrigerant (refer to procedure).
  2. Remove HVAC controller (refer to procedure).
  3. Loosen union and remove the low pressure charge port pipe (torque 15 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  4. Remove P-clip from pipe.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace A/C pipe O-ring.