10/02/2017 09:09:31

Trim - Center Console - Roadster 2.x

Correction code 15192302

Remove

  1. Remove rubber cover.
  2. Remove screw securing switch mounting plate to center console.
  3. Release clip securing rear of switch mounting plate to center console. Release mounting plate and withdraw harness.
  4. Disconnect switch connectors (x3), release harness clip and remove plate.
  5. Remove screw securing front section of center console to rear section of center console.
  6. Remove bolts (x2) securing front of center console to dash.
  7. Carefully release console from dash.
  8. Disconnect center console harness from front harness and remove center console.
  9. Remove screws (x4) securing lower cover to center console, release cover, disconnect connector and remove cover.
  10. Release harness clips (x2) and disconnect connectors (x3).
  11. Remove screws (x2) securing touch screen to center console and remove touch screen and collect washers.
  12. Remove screws (x3) securing gear selector assembly to center console and release assembly.
  13. Disconnect connectors (x4) from circuit board and remove selector assembly.
  14. Remove screws (x4) securing circuit board to center console and remove circuit board.

Install

Installation procedure is the reverse of removal.