23/06/2017 11:31:01

Module - Airbag

Correction code 17063302

Remove

  1. Remove upper dash panel (refer to procedure).
  2. Remove starter key and wait 30 seconds to allow SRS circuits to fully discharge before commencing work.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    To avoid personal injury, observe all relevant safety precautions before removing or testing any SRS components
  3. Disconnect yellow airbag SRS harness connector.
  4. Disconnect harness connector from airbag module.
  5. Remove nuts (x4) securing airbag module to dash (torque 8 Nm).
  6. Release ground connection and remove airbag module.

Install

Installation procedure is the reverse of removal.